How low is your sump?

[magpies]

How much below the chassis is your sump and how much ground clearance?

[WotnoV8]

2.8 S1 - about level with bottom of chassis.
155mm above ground but of course there is a handy sumpguard fitted (exhaust)

[PhilS3c]

My sump was 1.50cms above the anti roll bar with renewed rubber engine mounts it this helps - It is an S3c

[Spanish S2]

WotnoV8 said:

2.8 S1 - about level with bottom of chassis.
155mm above ground but of course there is a handy sumpguard fitted (exhaust)

+1 2.9 S2

[bil]

sorry, can't help with this at the mo as i suspect with the car jacked in the air and the engine sat on 2x4's above the chassis its going to give a false reading

[magpies]

bil said:

sorry, can't help with this at the mo as i suspect with the car jacked in the air and the engine sat on 2x4's above the chassis its going to give a false reading

2x4's are you building a Morgan version

[bil]

the poor lad was starting to whinne about the engine wieght as we tried replacing the engine brackets for the mounts, and id run out of axle stands so improvised...my carpentry isnt good enough for morgan