S1 Seat Belt Mount Bracket

[88S1]

Can anyone give me the dims and thickness of material etc of the seat belt mount brackets, mine had completely rusted away so no reference. Like the one in the picture below. Thanks in advance.

[magpies]

yeah mine had rusted away too
Unfortunately in the last eight year I have forgotten the dimensions.
I think it were 3mm steel plate, drilled and a seat belt nut welded on.
I'm sure someone with the body off will give you the correct measurements - does not need to be exact but within a mm or 2 is ok.



I've wrapped the outriggers with Denso tape

[Bercilac]

Before:

After:

Thicker steel, different shape, critical bit was the location of the nut.

[phillpot]

Bercilac said:

critical bit was the location of the nut.

.... and the thread, you probably know but it's 7/16" unf, not metric

[88S1]

Thanks all very useful info and pictures. Hopefully get these and the rest of the plates done over Christmas ready for blast and paint.

[chiefyo]

Knew this was around somewhere

[88S1]

chiefyo said:

Knew this was around somewhere

Your a star, many thanks.

[88S1]

88S1 said:

chiefyo said:

Knew this was around somewhere

Your a star, many thanks.

My version based on your design, with the dims for manufacture. No hole as need to check where the hole sits with body on. These are made, just need to go collect them.

Edited by 88S1 on Friday 25th December 12:44