Differential bracket bushes

[joe-motion]

Will be reinstalling the diff soon and the bushes that fit on the bracket do not look the best.

Was thinking of going all in with these
https://tvr-parts.com/tvr-parts/part-details/tvr-0...

However also seen these which are more cost effective.
https://www.racetechdirect.co.uk/car-parts/suspens...

Would there be a noticeable difference? Im going Poly on the trailing arms and will probably replace the bushes at the front when i get that far with poly ones.

thoughts please...

[phillpot]

joe-motion said:

Would there be a noticeable difference?

Only in your wallet


if you do splash out on the Poly's you might aswell do the big rear diff mount also.......

[GreenV8S]

How hard are those poly bushes for the rear? The ones I've seen for the front wishbones were relatively soft.

[joe-motion]

Already ahead of you Mike.

[phillpot]

joe-motion said:

Already ahead of you Mike.

....


Exactly same price as Superflex

[joe-motion]

Haha why not

[phillpot]

GreenV8S said:

How hard are those poly bushes for the rear?

I don't know about the diff mounts but the trailing arm ones are hard, like nylon or plastic!

[v8s4me]

[phillpot]

v8s4me said:

?

[joe-motion]

Quick question as fitting the diff back in tomorrow morning, do the diff bracket bushes have a washer between the chassis and the bush or does the rubber (or poly) sit right om the chassis? Cant remember what was there when i took it off apart from a load of gunk.

Cheers

[phillpot]

joe-motion said:

do the diff bracket bushes have a washer between the chassis and the bush

It's a NO from me.

[joe-motion]

Thanks Mike. Thought i better check