Seat belt anchor points

[jned2]

I've had welding work done on the rear beam and trailing arm brackets that involved a partial lift of the body. I've dropped the body back but cant' remember how the seat belts are anchored, I've no problem with the stalk or the point above and behind the drivers shoulder. I know the seat belt reel anchors through the rear wheel arch. That leaves the other end of the belt, does it anchor through the wheel arch with the reel, or does it anchor on to the bolt that goes through to the outriggers or the bolt just below the reel that drops down to a captive nut? Trying to make this clear (but failing miserably) as there are 3 bolts in a small area ! Thanks in advance.

[magpies]

Hi
the belt bolt goes through the sill into the a bracket on the outrigger - a few inches in front of the reel position

[phillpot]

magpies said:

Hi
the belt bolt goes through the sill into the a bracket on the outrigger

This little chappie..............

[jned2]

Great, thanks both.

[magpies]

Hi
the belt bolt goes through the sill into the a bracket on the outrigger - a few inches in front of the reel position