Help with my Speedo.
Discussion
Hi chaps ,
After some help again . Pretty much got the interior refurb wrapped , but noticed my Speedo is sitting at 40mph when the car is off and not dropping back to zero.
I haven't driven the car yet ( I have the plenum off and am in the middle of resealing the injectors and fuel rail.) But is this likely to reset itself on a road test or am I looking at new Speedo time . I have checked the connections and confirmed the earth is ok .
Car is a 2.9 S3 . Also the rev counter is sitting at 1000rpm when the car is off but I have heard that the rev counter can stick at its last reading on switch off.
Anyone got any ideas please .....?
Getting a bit fed up ...fix one thing and another bu**ers up.
After some help again . Pretty much got the interior refurb wrapped , but noticed my Speedo is sitting at 40mph when the car is off and not dropping back to zero.
I haven't driven the car yet ( I have the plenum off and am in the middle of resealing the injectors and fuel rail.) But is this likely to reset itself on a road test or am I looking at new Speedo time . I have checked the connections and confirmed the earth is ok .
Car is a 2.9 S3 . Also the rev counter is sitting at 1000rpm when the car is off but I have heard that the rev counter can stick at its last reading on switch off.
Anyone got any ideas please .....?
Getting a bit fed up ...fix one thing and another bu**ers up.
Hi chaps , so car is now mot,d but Speedo still not working .
Can I ask someone who has a spare one to hand if they can post a picture of the rear of it , I've been reading up and it seems some think there is a case earth as well as the plugged lead and others say there isn't.
Before I get the poxy thing out again and send it for repair , I want to check I've covered all bases ?
Hope someone can help and thanks in advance .
Can I ask someone who has a spare one to hand if they can post a picture of the rear of it , I've been reading up and it seems some think there is a case earth as well as the plugged lead and others say there isn't.
Before I get the poxy thing out again and send it for repair , I want to check I've covered all bases ?
Hope someone can help and thanks in advance .
Feel free to call me a total t**t , next time I'll connect the case earth which I "found " amongst the mass of wiring behind the dash . A mistake any s**t engineer could make ...... I "cleverly" removed the tab from the stud so couldn't remember it being fitted on the dash rebuild.
Cheers all for the replies .
Cheers all for the replies .
Edited by fozzy280472 on Thursday 2nd May 21:50
Gassing Station | S Series | Top of Page | What's New | My Stuff