Bulkhead bearing housing dimensions?
Discussion
Does anyone have the dimensions for the bulkhead bearing housing?
I want to make an ally one but don't really want to remove the old housing to measure it until it is time to replace it.
I'm sure I saw some drawings on here a while ago but the search isn't yielding the desired results.
I want to make an ally one but don't really want to remove the old housing to measure it until it is time to replace it.
I'm sure I saw some drawings on here a while ago but the search isn't yielding the desired results.
Are you looking at making the bearing housing, I made a heavy duty one that uses the TVR bearing and would take the triangle column bush. I am away for the rest of the week but can take a measurement at the weekend for you.
I use a ring on the other side drilled and tapped M6 X 5 cap heads
I use a ring on the other side drilled and tapped M6 X 5 cap heads
Edited by Alan Whitaker on Monday 11th February 13:55
Alan Whitaker said:
Are you looking at making the bearing housing, I made a heavy duty one that uses the TVR bearing and would take the triangle column bush. I am away for the rest of the week but can take a measurement at the weekend for you.
I use a ring on the other side drilled and tapped M6 X 5 cap heads
That's the one Alan, thank you.I use a ring on the other side drilled and tapped M6 X 5 cap heads
Edited by Alan Whitaker on Monday 11th February 13:55
Alan Whitaker said:
I think there was one of the TVR car parts who did one, It came with the bearing and triangle bush, think it was 4 bolts but made in aluminium.
Racetech do them.https://www.racetechdirect.co.uk/car-parts/suspens...
phillpot said:
Steve_D said:
Racetech do them.
I'm guessing you know about those Paul but want the satisfaction of making one yourself?I think I have an old plastic one somewhere I could take some measurements from, or send you it to measure yourself?
Gassing Station | S Series | Top of Page | What's New | My Stuff