TVR S2 metal coolant pipe
Discussion
How "handy" are you?
It can be cut back and the rusty bit remade with 15mm copper pipe which will, if it's cleaned up well, solder to the steel pipe.
Another option might be cut it shorter to lose the rusty bit and get a longer rubber/silicone hose to reach
New hose, crappy old clip? .......
It can be cut back and the rusty bit remade with 15mm copper pipe which will, if it's cleaned up well, solder to the steel pipe.
Another option might be cut it shorter to lose the rusty bit and get a longer rubber/silicone hose to reach
New hose, crappy old clip? .......
Edited by phillpot on Friday 26th October 15:35
Managed to buy one from David Geralds as they are currently breaking an S2. Job done, although the silicone hose that goes from the metal pipe through the bulkhead to the heater matrix is giving me a slow seep. A job for next week to try and get a better deal. But otherwise a job well done
Gassing Station | S Series | Top of Page | What's New | My Stuff