Servo help please
Discussion
https://www.ebay.com/p/Saab-9000-Brake-Booster-Ser...
I bought one of these from this seller for my S1. Looks correct and fits ok but yet to test it.
I bought one of these from this seller for my S1. Looks correct and fits ok but yet to test it.
Steve_D said:
That one is NOT correct for an SThis part is now available from TVRParts; https://tvr-parts.com/tvr-parts/part-details/tvr-j...
Also, the TVR Parts link is not correct for an S2.
Read the text .............
"This servo suits the later S Series TVRs with the brake fluid reservoir mounted directly on the master cylinder. It does NOT suit the master cylinder with the remote reservoirs, see TVR S28J 10056B for this "
You will need this one :
S2 Servo
Read the text .............
"This servo suits the later S Series TVRs with the brake fluid reservoir mounted directly on the master cylinder. It does NOT suit the master cylinder with the remote reservoirs, see TVR S28J 10056B for this "
You will need this one :
S2 Servo
TVRees said:
Also, the TVR Parts link is not correct for an S2.
Read the text .............
"This servo suits the later S Series TVRs with the brake fluid reservoir mounted directly on the master cylinder. It does NOT suit the master cylinder with the remote reservoirs, see TVR S28J 10056B for this "
You will need this one :
S2 Servo
Is there a cheaper source for this servo? I couldn’t justify spending the £270 hence the second hand unit off eBay. Read the text .............
"This servo suits the later S Series TVRs with the brake fluid reservoir mounted directly on the master cylinder. It does NOT suit the master cylinder with the remote reservoirs, see TVR S28J 10056B for this "
You will need this one :
S2 Servo
[quote=phillpot]
Is this the right one? Cheap as chips if it is although postage jumps it up a bit
Saab 9000 servo
It’s the correct servo for my S1 but I guess there all different, it matches the master cylinder:
https://tvr-parts.com/tvr-parts/part-details/tvr-s...
[url]
|https://thumbsnap.com/QdYdl1RF[/url]
Is this the right one? Cheap as chips if it is although postage jumps it up a bit
Saab 9000 servo
It’s the correct servo for my S1 but I guess there all different, it matches the master cylinder:
https://tvr-parts.com/tvr-parts/part-details/tvr-s...
[url]
|https://thumbsnap.com/QdYdl1RF[/url]
It looks like the alt parts list number is correct.
https://www.eeuroparts.com/Parts/132298/Brake-Boos...
https://www.eeuroparts.com/Parts/132298/Brake-Boos...
greymrj said:
Steve_D said:
That one is NOT correct for an SThis part is now available from TVRParts; https://tvr-parts.com/tvr-parts/part-details/tvr-j...
J0088. It's an aftermarket servo to fit Griffith, Chimaera and S. And they do fit the earlier S with a small bit of modification, IF you change the master and fit as reservoir at the same time. I've done it to mine.
DamianS3 said:
What do folks use to protect their new servo? Im thinking 2k epoxy or even Raptor bed liner for my new one
Thoughts ?
Damian s3
I just paint the under side with the same stuff I put on the chassis.....sort of waxoil stuff .....seems to make sense as it is in the same environment Thoughts ?
Damian s3
Gassing Station | S Series | Top of Page | What's New | My Stuff