S1 dashboard redesign
Discussion
I'm taking the dashboard out and rewiring,so now have a chance to design it again from scratch. I like the swoop of lights and adjacent gauges but could now actually wire them all or reduce the amount of them. Also could add some gauges to swoop towards the glove box. The H&V sliders are seized and the clock doesn't work so I can install new/different.
Your views and thoughts are welcome l. Remember this is NOT an S1 with original parts.
Your views and thoughts are welcome l. Remember this is NOT an S1 with original parts.
GreenV8S said:
You could consider adding the gauges that TVR, for some bizarre reason, missed out:
Engine oil temp
'Box and diff oil temp
Water injection flow rate
Boost pressure
AFR
I think it needs compound gauges to get them all in without a silly number of dials.
Nice idea but last 3 only needed if turbo'd. I'll do a fuel pressure one and maybe oil temperature Engine oil temp
'Box and diff oil temp
Water injection flow rate
Boost pressure
AFR
I think it needs compound gauges to get them all in without a silly number of dials.
Edited by magpies on Wednesday 29th August 19:18
Mick, you only need the basics on your side:
Artificial horizon
Turn and slip
Altimeter
Rate of climb
%:Power
Machmeter
Missiles armed & locked on indicator
Have you thought about incorporating a helmet visor HUD?
Your co-pilot/nav can monitor the other stuff such as:
Low fuel
Low coolant level
Low oil pressure
High coolant temp
Footwell water level
Exhaust system remaining
Landing gear position indicator ( 4 Greens/ 4 Reds )*
Integrated SatNav/Wherethefuqarewe indicator
On no account should the co-pilot be able to monitor groundspeed. .
If I think of any more such as 'Cloaking Device and Force Shields Activated' or 'DiLithium Crystal Energised' I'll let you know.
* Apologies to Simon. Perhaps consider a retrofit?
Artificial horizon
Turn and slip
Altimeter
Rate of climb
%:Power
Machmeter
Missiles armed & locked on indicator
Have you thought about incorporating a helmet visor HUD?
Your co-pilot/nav can monitor the other stuff such as:
Low fuel
Low coolant level
Low oil pressure
High coolant temp
Footwell water level
Exhaust system remaining
Landing gear position indicator ( 4 Greens/ 4 Reds )*
Integrated SatNav/Wherethefuqarewe indicator
On no account should the co-pilot be able to monitor groundspeed. .
If I think of any more such as 'Cloaking Device and Force Shields Activated' or 'DiLithium Crystal Energised' I'll let you know.
* Apologies to Simon. Perhaps consider a retrofit?
Edited by glenrobbo on Wednesday 29th August 06:40
DamianS3 said:
Hello fella
Just make sure you can fit a double din head unit with google / apple car play and youre golden..
Also how aboit moving the cabin vents and running off the heater so they can blow warm
Good luck
Damian S3
not sure about the double din unit but definitely sorting the heating ducting etc. Just make sure you can fit a double din head unit with google / apple car play and youre golden..
Also how aboit moving the cabin vents and running off the heater so they can blow warm
Good luck
Damian S3
Penelope Stopit said:
Have you a picture of the dash and a list of what it's got?
Only 4 of the warning lamps are wired up. Indicators / Main Beam / Ignition / Rear Fog.Gauges: Fuel / Water Temp / Oil Pressure / Voltage. I have added a digital volt meter connected to the battery cut off switch and a fuel pressure gauge.
The heater sliders are seized and the digital clock does not work
Edited by magpies on Wednesday 29th August 22:10
DamianS3 said:
Hello fella
Just make sure you can fit a double din head unit with google / apple car play and youre golden..
Also how aboit moving the cabin vents and running off the heater so they can blow warm
Good luck
Damian S3
If you need a stereo then you are not driving fast enough. Ditch that junk and save some weight.Just make sure you can fit a double din head unit with google / apple car play and youre golden..
Also how aboit moving the cabin vents and running off the heater so they can blow warm
Good luck
Damian S3
DamianS3 said:
Wow this would transform (update lols..) the interior but £££.
I have the s3 centre console to go with this if you wanted to update ??
Damian S3
So does the seller of the dash.. you could have both for £500 (or an offer) a bit steep but complete you would prob get at least £200 back your your s1 parts?I have the s3 centre console to go with this if you wanted to update ??
Damian S3
I know its a lot but would transform your racing interior?
Damian S3
DamianS3 said:
DamianS3 said:
Wow this would transform (update lols..) the interior but £££.
I have the s3 centre console to go with this if you wanted to update ??
Damian S3
So does the seller of the dash.. you could have both for £500 (or an offer) a bit steep but complete you would prob get at least £200 back your your s1 parts?I have the s3 centre console to go with this if you wanted to update ??
Damian S3
I know its a lot but would transform your racing interior?
Damian S3
Are you re-trimming the whole dash and fitting things where you want them?
Is that silver coloured panel a switch panel?
Bearing in mind personal likes and dislikes and all that....I find the warning lights and gauges layout as bad as it gets...they really are horrible looking to me and the warning lights themselves are cheap and nasty looking, I have fitted many of those warning lights and always wished I could have started from scratch with decent looking ones
Cooling fan/fans warning light/lights and override switch/switches may be of interest to you, perhaps a push button start with hidden security switch and do away with the ignition switch????????????????????
Gassing Station | S Series | Top of Page | What's New | My Stuff