Interesting S3 project Manchester with TVR plate

Interesting S3 project Manchester with TVR plate

Author
Discussion

greymrj

Original Poster:

3,316 posts

210 months

Friday 11th May 2018
quotequote all
Anybody with space and time to spare?
https://www.ebay.co.uk/itm/292556346465?ul_noapp=t...

tileart

156 posts

81 months

Friday 11th May 2018
quotequote all
My guess is that someone with any 4.3 variant TVR will buy it for the plate, and break/strip the rest. Fifteen bids as of 10:30pm today, so a few folk have spotted the potential.

ianwayne

6,528 posts

274 months

Friday 11th May 2018
quotequote all
He's not joking when he says 'more years than he can remember.' It hasn't had an MoT since electronic recording started 11 yrs ago!

Take heed of this from the gov website. I knew a car had to be taxed or SORN without a break to remove a number plate but was not aware there was a time limit:

"Your vehicle will need to be taxed if it’s had a SORN for longer than 5 years. It might also need to be inspected."

So. MoT required........ whistle

v8s4me

7,264 posts

225 months

Friday 11th May 2018
quotequote all
"There seems to be a query as to the location of the drive shaft and Gearbox bell housing."

What!? laugh

phillpot

17,253 posts

189 months

Saturday 12th May 2018
quotequote all


I've got a bell housing if that's putting anyone off wink

Driveshaft? I suspect he means propshaft?


I've had an engine in an Insignia estate so shouldn't be a problem in a Mondeo smile

v8s4me

7,264 posts

225 months

Saturday 12th May 2018
quotequote all
phillpot said:
..I've had an engine in an Insignia estate so shouldn't be a problem in a Mondeo smile
It's only a little V6 after all laugh

phillpot

17,253 posts

189 months

Saturday 12th May 2018
quotequote all
v8s4me said:
phillpot said:
..I've had an engine in an Insignia estate so shouldn't be a problem in a Mondeo smile
It's only a little V6 after all laugh
Yeah, but made of proper cast iron, none of that namby pamby alluminium stuff smile

glenrobbo

36,289 posts

156 months

Saturday 12th May 2018
quotequote all
phillpot said:
I've got a bell housing if that's putting anyone off wink

Driveshaft? I suspect he means propshaft?


I've had an engine in an Insignia estate so shouldn't be a problem in a Mondeo smile
I had an engine n the back of a Hillman Imp! wink


I've got a spare propshaft, just needs a new u/j. But perhaps he means one of the driveshafts is missing?

I hope somebody completes the restoration and brings another lovely S back onto the road.
( Said he with an S1 still up on axle stands. frown )

If only I had the time and facilties...

Kitchski

6,525 posts

237 months

Sunday 13th May 2018
quotequote all
v8s4me said:
It's only a little V6 after all laugh
That weighs as much as Jupiter...