Anyone breaking an S?
Discussion
Try this http://www.par-group.co.uk/rubber-polyurethane/D-S...
I think the 50 X 30 might fit, but take some measurements on your car, hope this helps.
I think the 50 X 30 might fit, but take some measurements on your car, hope this helps.
Maybe here also. http://www.polymax.co.uk/rubber-fenders/d-fenders/...
I've got none available, but my front ones were starting to come adrift, so I ground off the screwheads inside the wheel arches to remove and this is what the retaining steel strips looked like:
The bumper section is 2" ( 50mm ) across & I found that 40mm wide aluminium carpet fitting doorplates made ideal new retaining strips:
I would think that any good boat chandlers would supply the profile you need to replace the bumpers if missing or unusable.
The bumper section is 2" ( 50mm ) across & I found that 40mm wide aluminium carpet fitting doorplates made ideal new retaining strips:
I would think that any good boat chandlers would supply the profile you need to replace the bumpers if missing or unusable.
Gassing Station | S Series | Top of Page | What's New | My Stuff