refiiting rear hub

[spivvy]

just reassembling my trailing arm at last ,but i am after some advice how do i get the hub back on

do i just push it on and tighten with the big nut or is there another way , i am worried about damaging the thread
so any advice gratfully accepted

[tvrgit]

Put it on, make sure all the bearings are the right way round, and tighten up the four hub bolts, then fit and tighten the hub nut. Then take it off again cos you forgot to fit the backplate first. Ask me how I know this.

[spivvy]

thanks
i did that already
i found all these bits i forgot to fit

is the hub nut strong enough to tighten it up