S1 top door hinge
Discussion
Hi all
i have just re done the top door hinge as the door was about
to fall off, i did it last year before Scotland but didn't work
well, so this time i took the dash out and you can get to the
inner wing,i had to cut a small part of it away to see the top
of the hinge, then i put the new hinge on the door and in to
the hole then you can fill round the top to hold it in place
then take the door off again and fill around the nut and it should be
in the right place (i did it 4 times ) then i put a washer and
a second nut on the top and filled around that to make it a bit
stronger, i hope it will last a bit longer this time.
http://s689.photobucket.com/albums/vv259/bstone196...
some random photos here not to offensive i hope
Barry
i have just re done the top door hinge as the door was about
to fall off, i did it last year before Scotland but didn't work
well, so this time i took the dash out and you can get to the
inner wing,i had to cut a small part of it away to see the top
of the hinge, then i put the new hinge on the door and in to
the hole then you can fill round the top to hold it in place
then take the door off again and fill around the nut and it should be
in the right place (i did it 4 times ) then i put a washer and
a second nut on the top and filled around that to make it a bit
stronger, i hope it will last a bit longer this time.
http://s689.photobucket.com/albums/vv259/bstone196...
some random photos here not to offensive i hope
Barry
Gassing Station | S Series | Top of Page | What's New | My Stuff


