Discussion
Could be a number of issues.
Could be getting in past the screen then running down wiring or heating ducting and dripping off the lowest point.
Could be getting in around the brake or clutch cylinders. Or the throttle cable. Or the wiper spindles. Or even the wee clips that hold the rear brake pipes on to the bulkhead on their way to the rear brake valve. Or the mounting bolts for the valve itself.
Anywhere, in fact, that there's a hole in the body, bearing in mind that the leak point might be some distance from the drip (if it's running along the wiring etc as above).
Mine had exactly this problem and it took me ages working my way round everything above - I think it ended up being around the clutch cylinder bolts..
Could be getting in past the screen then running down wiring or heating ducting and dripping off the lowest point.
Could be getting in around the brake or clutch cylinders. Or the throttle cable. Or the wiper spindles. Or even the wee clips that hold the rear brake pipes on to the bulkhead on their way to the rear brake valve. Or the mounting bolts for the valve itself.
Anywhere, in fact, that there's a hole in the body, bearing in mind that the leak point might be some distance from the drip (if it's running along the wiring etc as above).
Mine had exactly this problem and it took me ages working my way round everything above - I think it ended up being around the clutch cylinder bolts..
Gassing Station | S Series | Top of Page | What's New | My Stuff





