Servo Vacuum Hose - V6 S3

Servo Vacuum Hose - V6 S3

Author
Discussion

DJ8226

Original Poster:

401 posts

180 months

Friday 1st July 2011
quotequote all
Evening Guys, I need some advice on the brake servo to plenum vacuum hose. I think mine may be letting air in at the servo end as it appears to be strained purely due to gravity pulling it down. Any suggestions on how I cure it? and if a new hose is required where I can source one? Thanks very much as always.

phillpot

17,279 posts

190 months

Friday 1st July 2011
quotequote all
Here you go

(other colours are available) wink

DJ8226

Original Poster:

401 posts

180 months

Friday 1st July 2011
quotequote all
Thanks - used that company on my AFM hoses, is the vacuum hose they sell reinforced some how to stop it collapsing or does the wall thickness simply do this? Sorry if I am being a dope just don't want to end up with no brakes should it not be the real deal. If you get my drift.

v8s4me

7,264 posts

226 months

Friday 1st July 2011
quotequote all
If in doubt, call Tim at ACT and he'll sell you the right stuff.

phillpot

17,279 posts

190 months

Friday 1st July 2011
quotequote all
DJ8226 said:
is the vacuum hose they sell reinforced some how to stop it collapsing or does the wall thickness simply do this? .
Think its just down to wall thickness, got it on mine and never had a problem.

Barkychoc

7,848 posts

211 months

Saturday 2nd July 2011
quotequote all
If you are worried about it collapsing just buy some standard servo hose and get a larger diameter silicon hose to slide over the top.

orange_dodo

694 posts

196 months

Saturday 2nd July 2011
quotequote all
I have a length of HGV vacuum brake hose on mine. That can definitely cope!

I bought it from a TVR supplier but I can't remember who. I'll have a look at my history tomorrow and let you know if you want.

GreenV8S

30,492 posts

291 months

Saturday 2nd July 2011
quotequote all
orange_dodo said:
I have a length of HGV vacuum brake hose on mine. That can definitely cope!
hehehehehehe

Vacuum is vacuum, you can't get any lower than 0 PSI whether it's on a truck or a car. Ordinary vacuum hose the right size is all you need.

orange_dodo

694 posts

196 months

Sunday 3rd July 2011
quotequote all
What are you talking about, HGVs are big so have a much bigger vacuum than a car. HGV vacuum hose is therefore much better biggrinwink










At least if it is HGV brake hose you know it actually is vacuum hose not just any old hose which will collapse.

Oh and I just looked, it was £6 from David Gerald.

phillpot

17,279 posts

190 months

Sunday 3rd July 2011
quotequote all
orange_dodo said:
, HGVs are big so have a much bigger vacuum than a car.
And ships are bigger than lorries so they must have a huge vacuum !

v8s4me

7,264 posts

226 months

Sunday 3rd July 2011
quotequote all
And the universe is infinitely big so the vacuum in space must be infinitely huger still! laugh

DJ8226

Original Poster:

401 posts

180 months

Tuesday 12th July 2011
quotequote all
Advice much appreciated. Will get a length and see if it cures my problem.

DJ8226

Original Poster:

401 posts

180 months

Wednesday 24th August 2011
quotequote all
Now fixed with new hose. Many Thanks

Deeman

1,609 posts

189 months

Saturday 14th December 2019
quotequote all


Bit of a thread revival. I wasn’t expecting this. Grade of pipe is right too. Brakes now working well, so think it’s been closing up for a while. Not something I want a repeat of.

DamianS3

1,803 posts

189 months

Sunday 15th December 2019
quotequote all
Ooo nasty...

D

phillpot

17,279 posts

190 months

Sunday 15th December 2019
quotequote all


Did you replace it all or just the flat bit? ....... wink

Deeman

1,609 posts

189 months

Sunday 15th December 2019
quotequote all
Replaced it all Mike. I prefer the skid marks on the road, not in my underpants!