Printing large jpg - ideas?

[rene7]

Hope someone may have previously had this problem - have recently done my family genealogy tree having gone back 14 generations.
>
Would like to print out the tree and maybe fix it to a wall in the mancave
>
The jpg of the full size file is around 28800x15000 pixels at 200DPI which I think would be the minimum needed to retain sufficient detail to read when printed, though in a perfect world would prefer 300dpi if possible
>
Any ideas where I maybe able to get it printed, and at what £cost£ approx?
Ta
Rene

[Pixel Pusher]

Big file. 3.65m x 1.9m

How big do you want it printed?

Do you want it printed in one piece?

[bstb3]

Yeah depending on the materials that could get expensive quick.

Alternate logic to printing, buy a big feck off tv for the wall, display it on that when guests come, watch movies / footy / display other art on it the rest of the time. Has the benefit of allowing you to update the tree if things happen in the future without needing to print it again.

[rene7]

Needs to be printed full size - there's so much info'/detail that it has to be that size to be readable.
Prefer to have it in 1 sheet [easier to hang/paste on wall] - there won't be any updates - the tree is correct and has all the detail already in it.
>
FYI it's taken 14 years research to get to this stage It also has a very famous musician [who wants a copy - I maybe give it to him for Xmas] and Royalty in it
>
It also need's to be full colour.
>
Tried the TV - I have an 80" TV - detail is poor
TA
Rene

Edited by rene7 on Wednesday 20th November 17:16

[Simpo Two]

50p says you'll get it printed out, stick it on the wall - then next day discover another ancestor

[InitialDave]

Try bigartandbanners.com, have had a couple of large prints done by them before.

[Pixel Pusher]

Suspect this will end up a vinyl print rather than paper then at that size / 1 piece requirement.

[rene7]

Thanks for the help guys - will check out your suggestions
Rene

[QuartzDad]

I used http://www.genealogyprinters.com/ to print my Dad’s tree. He had over 4000 people in it but by restricting it to just the 1200 direct ancestors and descendants across 14 generations it came out as 37 feet long and 3 feet high. Cost was £90 plus postage. Looked really good, we had it displayed at his wake.