360: Component vs. HDMI...
360: Component vs. HDMI...
Author
Discussion

LukeBird

Original Poster:

17,170 posts

238 months

Friday 22nd January 2010
quotequote all
A quick one...
Is there any visual and audio or difference between HDMI & Component?
I'm just about to buy an AV receiver/amp and have both cables for my 360, but if I want to use HDMI, I'll need the HDMI with Optical out on to get the audio.
So can I save myself £20 on the new cable and use component instead? scratchchin

I know HDMI can do audio & video, but the receiver can't by HDMI...

Steve Evil

10,822 posts

258 months

Friday 22nd January 2010
quotequote all
Looks a little bit sharper to my eyes, but if you've not gone from one straight to the other, you'd probably not notice. I'm sure you could get a HDMI and toslink cable for under £10 though.

Oakey

27,981 posts

245 months

Friday 22nd January 2010
quotequote all
Why are you buying an AV Receiver that can't receive audio over HDMI?

Any decent, new amp should be able to handle that no problem. Perhaps it'd be more worth your time choosing an amp that can handle audio over HDMI, otherwise you're limiting your options in the future.

LukeBird

Original Poster:

17,170 posts

238 months

Friday 22nd January 2010
quotequote all
Steve Evil said:
Looks a little bit sharper to my eyes, but if you've not gone from one straight to the other, you'd probably not notice. I'm sure you could get a HDMI and toslink cable for under £10 though.
Fairy nuff. I'll have a look out for a cheaper cable.
I guess I could try it on component and if it's disappointing then get the HDMI/optical cable afterwards.
I just wasn't sure if there was a noticeable difference... smile

Oakey said:
Why are you buying an AV Receiver that can't receive audio over HDMI?

Any decent, new amp should be able to handle that no problem. Perhaps it'd be more worth your time choosing an amp that can handle audio over HDMI, otherwise you're limiting your options in the future.
Because it's a more budget end one. It's been recommended on sound quality, which is far more important to me than having an extra cable in the back. smile

The_Jackal

4,854 posts

226 months

Friday 22nd January 2010
quotequote all
If you are going budget, then be aware that it will not be the cable that will degrade the signal it will be your amp.
The only difference I have read about from users, seems to be a difference in contrast.
You may find the picture is worse just by going through your amp, compared to what you are used to now. I think you will find that less acceptable.

Oh and dont go buying a gold HDMI cable, you are better off just writing MONSTER in felt tip on a Tesco cable.

LukeBird

Original Poster:

17,170 posts

238 months

Friday 22nd January 2010
quotequote all
The_Jackal said:
If you are going budget, then be aware that it will not be the cable that will degrade the signal it will be your amp.
The only difference I have read about from users, seems to be a difference in contrast.
You may find the picture is worse just by going through your amp, compared to what you are used to now. I think you will find that less acceptable.

Oh and dont go buying a gold HDMI cable, you are better off just writing MONSTER in felt tip on a Tesco cable.
From what I've read, it seems to have fine picture quality. The only real negative seems to be the lack of audio over HDMI.
Yeah I won't be buying an oxygen-free copper one with gold plugs! wink

Cock Womble

29,908 posts

259 months

Friday 22nd January 2010
quotequote all
Can't you just connect the video direct from the XBox to your telly (via component, HDMI or VGA) and the sound to your receiver, cutting out the middle-man, so to speak?

Digby

8,352 posts

275 months

Friday 22nd January 2010
quotequote all
Does your TV have an optical out socket by any chance? I simply run HDMI to my TV and optical cable out of the TV into my amp.Before this, I had it wired straight to the amp but then ran into the same problem as you as my new 360 didn't have the optical connection.

I also ran HDMI, Component and VGA on the 360.I would say image quality will depend more on your TV than the cables.I used to see better colours, but a marginally more fuzzy image on component on my old 720 tv with the VGA being sharper, but it needed some settings changed on the 360 to up the richness.HDMI sat somewhere in the middle of those, so was the best bet all round.I then got a better 42" 1080p TV and the difference between all of them is so minimal, it really makes no odds.

Edited by Digby on Friday 22 January 17:43

LukeBird

Original Poster:

17,170 posts

238 months

Friday 22nd January 2010
quotequote all
Cock Womble said:
Can't you just connect the video direct from the XBox to your telly (via component, HDMI or VGA) and the sound to your receiver, cutting out the middle-man, so to speak?
I could, yes, that is certainly an option. smile

Digby said:
Does your TV have an optical out socket by any chance? I simply run HDMI to my TV and optical cable out of the TV into my amp.Before this, I had it wired straight to the amp but then ran into the same problem as you as my new 360 didn't have the optical connection.

I also ran HDMI, Component and VGA on the 360.I would say image quality will depend more on your TV than the cables.I used to see better colours, but a marginally more fuzzy image on component on my old 720 tv with the VGA being sharper, but it needed some settings changed on the 360 to up the richness.HDMI sat somewhere in the middle of those, so was the best bet all round.I then got a better 42" 1080p TV and the difference between all of them is so minimal, it really makes no odds.
It doesn't have optical out, no. One oversight on my behalf when I bought it!
Oh well, I'm sure I'll end up with a big plasma soon! smile
I'll see how it looks through the receiver and work out which cable is best.

bananapieface

403 posts

203 months

Friday 22nd January 2010
quotequote all
I run HDMI straight to my TV and I split the old component plug socket so I can run surround via optical to my amp.

The_Jackal

4,854 posts

226 months

Friday 22nd January 2010
quotequote all
The xbox component lead should have an Optical output socket in the back of it. Thats how I run the sound to my surround system.

bonsai

2,015 posts

209 months

Friday 22nd January 2010
quotequote all
Is audio over HDMI for the 360 5.1 or 2 channel? I currently use optical to my amp, and HDMI, not sure why though. May not make any difference.

LukeBird

Original Poster:

17,170 posts

238 months

Saturday 23rd January 2010
quotequote all
The_Jackal said:
The xbox component lead should have an Optical output socket in the back of it. Thats how I run the sound to my surround system.
Oh right, didn't realise that...
Is that the 'standard' component cable you get? i.e. the one that would have come with my Elite?

bananapieface

403 posts

203 months

Saturday 23rd January 2010
quotequote all
LukeBird said:
The_Jackal said:
The xbox component lead should have an Optical output socket in the back of it. Thats how I run the sound to my surround system.
Oh right, didn't realise that...
Is that the 'standard' component cable you get? i.e. the one that would have come with my Elite?
Yep.

LukeBird

Original Poster:

17,170 posts

238 months

Saturday 23rd January 2010
quotequote all
Thanks! smile