Show us your Mustangs
Discussion
Not too bad; they're open louvres, so you can see behind at an angle. Otherwise, it's just a matter of positioning yourself carefully so you can see what's approaching. Ultimately, the visibility is no worse than on a van.
For me, the 1/4 windows were one of the worst design aspects of the S197. The covers improve the look dramatically (IMO). As an aside, I got them from the US. They cost <£100, and the colour match is perfect. Same for the scoops behind the doors. UK prices really are a rip-off.
For me, the 1/4 windows were one of the worst design aspects of the S197. The covers improve the look dramatically (IMO). As an aside, I got them from the US. They cost <£100, and the colour match is perfect. Same for the scoops behind the doors. UK prices really are a rip-off.
My Mineral Grey Mustang GT...
Mods:
C&L 'Racer' cold air induction kit (includes 95mm MAF)
Predator Tuned for 99 octane Shell V-Power
Borla Exhausts
Eibach lowered suspension (1.6" front drop, 2" rear drop, 35% uprated)
Steeda Panhard Rod (to re-locate rear axle after lowering)
BAER 14" cross-drilled and grooved brakes all-round, includes BAER front calipers
20" American Racing Shelby 'Razor' wheels, shod with 255/35 tyres
1 degree negative camber adjusted into front wheels
Mods coming...
'Powered by Ford' plenum cover (arrived, just needs fitting)
Steeda Strut tower brace (arrived, just needs fitting)
Ford Racing Performance Parts front struts and shocks (in post)
Steeda Strut bearings (also in post)
Eleanor style hood (about to order this tomorrow!)
Anyway, pics...
Mods:
C&L 'Racer' cold air induction kit (includes 95mm MAF)
Predator Tuned for 99 octane Shell V-Power
Borla Exhausts
Eibach lowered suspension (1.6" front drop, 2" rear drop, 35% uprated)
Steeda Panhard Rod (to re-locate rear axle after lowering)
BAER 14" cross-drilled and grooved brakes all-round, includes BAER front calipers
20" American Racing Shelby 'Razor' wheels, shod with 255/35 tyres
1 degree negative camber adjusted into front wheels
Mods coming...
'Powered by Ford' plenum cover (arrived, just needs fitting)
Steeda Strut tower brace (arrived, just needs fitting)
Ford Racing Performance Parts front struts and shocks (in post)
Steeda Strut bearings (also in post)
Eleanor style hood (about to order this tomorrow!)
Anyway, pics...
I'll get mine in before Stig arrives and slows the server down with his huge mod list
'05 GT. Roush shocks, springs & sway bars. Hurst Shifter. Axis Reverb 18x9.5 wheels. SLP loudmouth exhaust. CDC billet grille.
And this goes on starting tomorrow.
'05 GT. Roush shocks, springs & sway bars. Hurst Shifter. Axis Reverb 18x9.5 wheels. SLP loudmouth exhaust. CDC billet grille.
And this goes on starting tomorrow.
Edited by benny.c on Friday 29th February 10:38
Well, rather than slowing things down - I'll just put a link to my website, my fingers would be bleeding if I posted it all again
http://www.ultima-gtcs.info
I will post one pic though to give you an idea:
http://www.ultima-gtcs.info
I will post one pic though to give you an idea:
Well, rather than slowing things down - I'll just put a link to my website, my fingers would be bleeding if I posted it all again
http://www.mustang-gtcs.info
I will post one pic though to give you an idea:
http://www.mustang-gtcs.info
I will post one pic though to give you an idea:
Edited by Stig on Friday 29th February 12:53
zektor said:
My Mineral Grey Mustang GT...
Mods:
C&L 'Racer' cold air induction kit (includes 95mm MAF)
Predator Tuned for 99 octane Shell V-Power
Borla Exhausts
Eibach lowered suspension (1.6" front drop, 2" rear drop, 35% uprated)
Steeda Panhard Rod (to re-locate rear axle after lowering)
BAER 14" cross-drilled and grooved brakes all-round, includes BAER front calipers
20" American Racing Shelby 'Razor' wheels, shod with 255/35 tyres
1 degree negative camber adjusted into front wheels
Mods coming...
'Powered by Ford' plenum cover (arrived, just needs fitting)
Steeda Strut tower brace (arrived, just needs fitting)
Ford Racing Performance Parts front struts and shocks (in post)
Steeda Strut bearings (also in post)
Eleanor style hood (about to order this tomorrow!)
Anyway, pics...
thats my fave so far... what BHP is that running at ?Mods:
C&L 'Racer' cold air induction kit (includes 95mm MAF)
Predator Tuned for 99 octane Shell V-Power
Borla Exhausts
Eibach lowered suspension (1.6" front drop, 2" rear drop, 35% uprated)
Steeda Panhard Rod (to re-locate rear axle after lowering)
BAER 14" cross-drilled and grooved brakes all-round, includes BAER front calipers
20" American Racing Shelby 'Razor' wheels, shod with 255/35 tyres
1 degree negative camber adjusted into front wheels
Mods coming...
'Powered by Ford' plenum cover (arrived, just needs fitting)
Steeda Strut tower brace (arrived, just needs fitting)
Ford Racing Performance Parts front struts and shocks (in post)
Steeda Strut bearings (also in post)
Eleanor style hood (about to order this tomorrow!)
Anyway, pics...
Gassing Station | Mustangs | Top of Page | What's New | My Stuff