Sequential front indicators for export/EU/UK Mustangs WORKIN

Sequential front indicators for export/EU/UK Mustangs WORKIN

Author
Discussion

Gibbo205

Original Poster:

3,572 posts

214 months

Thursday 27th July 2017
quotequote all
Hi there


I've always loved the Audi bling bling sequential indicators the latest models have and was always upset by how our UK Mustangs did not feature any sequential action. frown

As such I discovered a company called Coplus who do front sequentials, but they were like £300+ for a paid delivered. As such I discovered the manufacturer in Taiwan and contacted them on bulk ordering, as such I was able to get quite a good discount resulting in nearly saving £100

To help the Mustang community I have made them available where I work, www.overclockers.co.uk and you can order a pair using this link:
https://www.overclockers.co.uk/coplus-sequential-f...


Install is a DIY, takes approx two hours, easiest way, jack front of car up, remove front wheels, push back the arch/fender liner and then using a 7mm deep socket remove the 7 bolts holding the whole light unit in the bumper. Once out remove the three 7mm bolts and swap indicators over! I self tapped the module boxes to the belly pan.

Couple of videos below of the finished results:

https://www.youtube.com/watch?v=SZwgE_e2hQM

https://www.youtube.com/watch?v=wIDmlQPLK9Q


Front sequential to buy link:
https://www.overclockers.co.uk/coplus-sequential-f...

Rear sequential to buy link:
https://store.exoticponymods.com/products/2015-201...


I love the results and all for less than £350 !
Of course the rears look more impressive if your rear lights are tinted red. wink