Clutch help please

[Walford]

I have got a TVR with a Chevy LS engine and a Mustang T56 6 speed box from the late 90,s
am looking for a 295mm (11 5/8) clutch plate with the Ford 10 spline
any ideas which car,s this could come from

Thanks

[sonicbloo]

If its from a 'stang it must be from a 2003 or 2004 Cobra, they were the first mustangs to get a 6 speed box (apart from the limited edition 2000 cobra R)

[Walford]

Realsteal do these

Standard NEW Sachs Clutch Kits

BYK70272-01 11" x 1-1/16" diaph £258.98
Mustang 281 Cobra 1999 281 Cobra 2001-04
Mustang 281 GT 2001-04 TR3650 Trans (fr 2/01)

Anybody used them, I would be putting around 400 crank HP
through it in a fast road car

Thanks

[The Legend]

If you're thinking of putting 400bhp through it then I'd recommend you get an uprated clutch rather than just a standard replacement.
SPEC do a great selection of 'stage' clutches which will handle the power adequately, though you will have to get one in from the US as I don't know of a UK supplier.
Good luck!

[ukcobra]

If you dig out the right part number, I still have some clutch parts left over when the 2000R made it to the UK.

I may just have what you are looking for.

[Walford]

ukcobra said:

If you dig out the right part number, I still have some clutch parts left over when the 2000R made it to the UK.

I may just have what you are looking for.

Bought a Cobra clutch from Realsteal about an hour before your post
but thanks anyway,
do you have a 4.6 mustang

[ukcobra]

Glad you got sorted. The clutch parts are 4.6/5.4 Mod motors.

I have a 5.0 and 5.8.

Mark