R500 Superlight wheel offset?
Discussion
I'm trying to find out what offset the R500 Superlight wheels are?
Like the ones below
http://www.demon-tweeks.co.uk/Motorsport/Caterham_...
And also what the standard tyre sizes are?
Like the ones below
http://www.demon-tweeks.co.uk/Motorsport/Caterham_...
And also what the standard tyre sizes are?
My R500 has these, as they are fitted as standard.
The tyres are:
Front Avon CR500 tyre 175/55/13
Rear Avon CR500 tyre 205/55/13
Available from Caterham Direct:
https://www.caterhamparts.co.uk/product_info.php?p...
Not sure about the offset though sorry.
Nige.
The tyres are:
Front Avon CR500 tyre 175/55/13
Rear Avon CR500 tyre 205/55/13
Available from Caterham Direct:
https://www.caterhamparts.co.uk/product_info.php?p...
Not sure about the offset though sorry.
Nige.
The Caterham 8 spokes are 6" front and 8" rear. Offset is ET24. If you go for wider wheels then that offset may not work.
The critical dimension is the backdepth - how far the wheels extend into the car from the hub face. On the fronts this is limited by the wing stay and should be around 113mm. On the rears it should be around 140mm.
Nick
The critical dimension is the backdepth - how far the wheels extend into the car from the hub face. On the fronts this is limited by the wing stay and should be around 113mm. On the rears it should be around 140mm.
Nick
I've just gone down this route in some detail. If you're thinking of fitting wider tyres or rims you'll probably want to reduce the offset by 50% of the increase in tyre/rim section. e.g. a 200 section tyre is 12.5mm wider each side than the standard 175, therefore you'll need to reduce the offset by 12-13.
Gassing Station | Caterham | Top of Page | What's New | My Stuff