Discussion
I know of a car with 10" wide rears and the Redline supplies wider arches.
The wheels are MB's with 6" inners and 4" outers. This gives an offset of ET 0.
If you're wheels are more inset, then you're likeley to have clearance issues on radius arms etc (but you could use thin spacers).
The wheels are MB's with 6" inners and 4" outers. This gives an offset of ET 0.
If you're wheels are more inset, then you're likeley to have clearance issues on radius arms etc (but you could use thin spacers).
Edited by Red Seven on Saturday 19th December 03:48
Origionaly, and now for use in the wet, a 8.5" ET24 wheel fits. With the 10" -7 the backspace is increased and the wheel is further out by 50mm i think. When i get the wheel im going to measure everything to check.Not sure if the redline wide arches will be wide enough, should be if they are being used already!
Gassing Station | Caterham | Top of Page | What's New | My Stuff