Weber 40 DCOE vacuum take-off
Discussion
There is a vacuum take off on all but very early carbs. It’s under one of the two brass screws on the top. One is the progression hole cover, the other a vacuum blanking plug. I always used to remove all 4 and use some adaptors to attach my 4 vacuum gauges. It’s either a 5 or 6 mm standard thread.
its number 48 in this diagram
http://www.carburetion.com/diags/45DCOEDiaginfo.as...
its number 48 in this diagram
http://www.carburetion.com/diags/45DCOEDiaginfo.as...
Edited by buzzer on Friday 20th March 09:48
Gassing Station | Caterham | Top of Page | What's New | My Stuff