CSR front wings
Discussion
I fitted CSR wings on my last 7, the radius is designed for 15" wheels but look fine with 13", TBH the rolling radius is not much different
You could try Seven Tweeks, I know they were producing wings and stays for 13" rims.
The stays were the problem as the CSR stays don't fit standard cars.
Martin
You could try Seven Tweeks, I know they were producing wings and stays for 13" rims.
The stays were the problem as the CSR stays don't fit standard cars.
Martin
Thanks for the input lads. I managed to "roll" the wings stays around for the normal type wings by drilling a hole in the back of the flat part of the stay and moving the ball joint/ stay around to that part.This was in an effort to stop the wing being so proud above the tyre.
The conclusion was to fit the csr ones!.
Im trying to get around to this over the winter before next season, so fingers crossed will have it done.
The conclusion was to fit the csr ones!.
Im trying to get around to this over the winter before next season, so fingers crossed will have it done.
Sam
Here is a link to pictures of my blackbird with carbon csr wings:
http://good-times.webshots.com/photo/2135171640103...
Tis a small world as it is Martins old car but now mine I am pleased to say.
Personally I think 185 60's look a bit small and keep meaning to try some 205's on the front to see what they look like.
Will
PS hi Martin
Here is a link to pictures of my blackbird with carbon csr wings:
http://good-times.webshots.com/photo/2135171640103...
Tis a small world as it is Martins old car but now mine I am pleased to say.
Personally I think 185 60's look a bit small and keep meaning to try some 205's on the front to see what they look like.
Will
PS hi Martin
Looking good. I will have something like 215s on the front and 235 on the back.
Also i might have to run slicks but not sure yet, they will probably be around the same width.
I am also wondering about the roll cage aero mod. I have a set of black plastic inserts but i think the csr being a wider chassis must have a wider roll cage, so they'll have to be trimmed a little
Also i might have to run slicks but not sure yet, they will probably be around the same width.
I am also wondering about the roll cage aero mod. I have a set of black plastic inserts but i think the csr being a wider chassis must have a wider roll cage, so they'll have to be trimmed a little
Gassing Station | Caterham | Top of Page | What's New | My Stuff