Urgent loan of torque wrench&socket for rear hubs in Farnham

[Steve_T]

I have a torque wrench that could manage that torque setting (it's 1/2" drive), but not a 41mm socket.

Steve.

Edited by Steve_T on Friday 30th June 13:41

[racecardoctor]

I've got that kit, based near Lewes Sussex if you wish to borrow it, contact details on www.racecardoctor.com

[MikeE]

Thanks for the offer guys, in the end I bought a 225lb/ft torque wrench from Halfords (£60) and a 41mm socket from Camberley Auto Factors (£14) so not cheap but at least I have them for future use (and if anyone wants to borrow them

Managed to get the hubs off and replace the studs in a couple of hours so easy enough, and while I was there I fortunately noticed one of the pads was missaligned and so had prematurely ward down to the metal on one side - just as well I checked before my next trackday!

cheers

[Steve_T]

No problem Mike, I acquire tools as I need them too.

Edited by Steve_T on Monday 3rd July 16:04