refitting nose cone..
Discussion
Assuming that the nose cone with the fastener is close enough to the appropriate mounting bracket….. if you start with the top ones look for the cutout at the back of the fastenerr and align over the wire on the chassis bracket. If aligned properly you should then be able to push the fastener virtually flat against the nose cone . Then by turning the fastener using a coin or stubby screwdriver through a quarter of a turn clockwise the fastener will lock.. if you can’t get the fastener any where near the bracket wire then the nose cone/chassis bracket alignment isn’t correct.
Gassing Station | Caterham | Top of Page | What's New | My Stuff