Safety Devices cage removal help

[L.A.D]

Looking for a wee bit if assistance in removing a Safety Devices full cage.
I have removed the four bolts on each side along with the ones that go down to the rear.
The cage is now only located on one point each side. Just behind the seat.
I thought I had nothing better to do than just lift the cage out.
It does not want to budge and I obviously don't want to start placing too much pressure/force onto it.
Is it bolted in from underneath?
There does not seem to be much room and I cannot see in.
Any help would be appreciated

[VHPD]

It is bolted in above the suspension. You need to take the dampers off to get access.

Eta. The bolt heads are very shallow. It is best to grind down an old socket to get a better purchase on them

Edited by VHPD on Sunday 29th January 15:12

[L.A.D]

Excellent, thank you for the quick reply.