new crate engine for a z06
Discussion
500 cubes is possible with a deck plate. Or 454 with the std 9.24" deck.
Actually I think 460 cubes is possible with an RHS block.
Lead times are long usually for aftermarket builds. TBH the quickest and best option is probably an aftermarket 427 and bolt the good bits of what you have left on. Or go with an lsx102 intake and maybe some ported ls7 or gmpp lsx heads, you will probably push more air that way anyway than the larger cube engines.
(ie) Spend more on getting the std 427 to breathe better. Heads, cam & intake
Actually I think 460 cubes is possible with an RHS block.
Lead times are long usually for aftermarket builds. TBH the quickest and best option is probably an aftermarket 427 and bolt the good bits of what you have left on. Or go with an lsx102 intake and maybe some ported ls7 or gmpp lsx heads, you will probably push more air that way anyway than the larger cube engines.
(ie) Spend more on getting the std 427 to breathe better. Heads, cam & intake
http://www.partsworldperformance.com/ls7_v8_7_0l_c...
That Link should take you to 10 Grands worth of Corvette Z06 'Crate Engine' Zubair
Have Fun!
That Link should take you to 10 Grands worth of Corvette Z06 'Crate Engine' Zubair
Have Fun!
Not aiming high enough Ken, just need the foldies
http://www.partsworldperformance.com/ls9_6_2ltr_su...
Deffo the one to have.
Dave.
http://www.partsworldperformance.com/ls9_6_2ltr_su...
Deffo the one to have.
Dave.
Yeah Dave.... will it go in a Mondeo!....Would go like Stink Mind!
How you doing you have been off the Radar Matey....Is your Z06 'Fettled'
Mine is off PH'ds ......had a Spar with a few Folk making silly offers it's not for Sale now But .......it's an APR GTC 500 rear wing for me next 70" wide 3D shaped with end plates....allah the LeMans Stylee.............What's that... Just Kidding!
How you doing you have been off the Radar Matey....Is your Z06 'Fettled'
Mine is off PH'ds ......had a Spar with a few Folk making silly offers it's not for Sale now But .......it's an APR GTC 500 rear wing for me next 70" wide 3D shaped with end plates....allah the LeMans Stylee.............What's that... Just Kidding!
zubair said:
hi ken its not for the viper the engine is for an 06 z06 that needs either rebuilding or replacing just needed a rough guide on the cost.thanks
Obviously that depends what's wrong in the first place.Totally impossible to give any costs, until you know what you need to repair/replace in the first place !
Gassing Station | Corvettes | Top of Page | What's New | My Stuff