From memory - mostly very easy, but the back two on the drivers side are a bit tight for the socket. Normally a little easier if you have a plug socket that has a hex end you can put a spanner on instead of the ratchet.
Depends if its an L98 or LT1 C4, L98's are fairly easy, but LT1's are a pig, if you've got access to a lift then use it as the plugs are easiest to access from underneath.
Depends if its an L98 or LT1 C4, L98's are fairly easy, but LT1's are a pig, if you've got access to a lift then use it as the plugs are easiest to access from underneath.
How come they're harder to get at? I know the LT1 is a 2nd Gen small block - is it covers that are in the way or are the plugs angled totally differently? (just interested!)
