DIC or Driver Information Center

DIC or Driver Information Center

Author
Discussion

tommyg

Original Poster:

658 posts

236 months

Tuesday 31st July 2007
quotequote all
Does anyone know how to reprogram this? I have an "overspeed warning" that kicks in with a (loud) beep at 75mph and the writing stays there so nothing else can be displayed untill I slow below 75mph (with the exception of proper warnings).

Is there an easy "off" for this, I remember it being an option on my Monaro but can't see anything in the manual.

Thanks

V7TTE

4,903 posts

240 months

Tuesday 31st July 2007
quotequote all
With the trip computer display showing, hold down the "set" button for two seconds and it should clear it. I can't claim knowledge for this, but found it here:

http://64.233.183.104/search?q=cache:eCdIL-vHHJsJ:...

... I think I read it right!

Good luck, nobody likes being told they are going too fast!!!

tommyg

Original Poster:

658 posts

236 months

Tuesday 31st July 2007
quotequote all
Thats for the corvette one right? I only mentioned the Monaro because its basically the same manufacturer and I used to have one before the corvette smile

I'll give it a go, thanks!

vetteheadracer

8,271 posts

259 months

Tuesday 31st July 2007
quotequote all
I am assuming you exceed 75MPH when using the car on track.....wink

tommyg

Original Poster:

658 posts

236 months

Tuesday 31st July 2007
quotequote all
er well yeeees, but also being on the Isle of Man has the one advantage of knowing that when you see the white circle with a diagonal black stripe through it, there is no national speed limit to be applied!