Learning how to read/burn Chip and AFR ratio meter.:eek:

[ZR1cliff]

I am in the proccess of learning how to burn my own chip and fitting a ZEITRONIX Wideband Air/Fuel ratio meter,its all a bit confusing but hey ime gonna hit it one step at a time.

Here is most of the parts laid out and left on the table so i can get familiar.

[pic]http://i4.photobucket.com/albums/y114/LoTu5/2005_1002chip0002.jpg[/pic]

And here is one of the pipes from the passenger side that i have had a thread welded into place for the AFR sensor,i am going to do the same with the drivers side so i can monitor both sides alternitavely.

[pic]http://i4.photobucket.com/albums/y114/LoTu5/2005_1002chip0001.jpg[/pic]

[boosted ls1]

Those candle stick holders won't fit I can tell you that now!

Boosted.

[GreenV8S]

I recognise the ZT-2, it's a very nice bit of kit. Shame I fried the wiring on mine so it isn't quite as pretty as yours!

[ZR1cliff]

boosted ls1 said:

Those candle stick holders won't fit I can tell you that now! Boosted.

,i burnt my first chip today by the way,well two to be honest, not the ones ime used to burning

[ZR1cliff]

GreenV8S said:

I recognise the ZT-2, it's a very nice bit of kit. Shame I fried the wiring on mine so it isn't quite as pretty as yours!

Ive got some of that heat deflector trunking to cover the loom in,thanks for the warning